90 Rockwell Automation Publication 2711P-AP006C-EN-P - November 2018
Chapter 8 Create the Runtime Application
6. To select External Storrage 1 or 2, press the Source button or [F1] on the
terminal.
7. Select your runtime application.
c. To select the application (if multiple applications exist), press the up
or down cursor.
d. Press the Load button or [F2] function key on the terminal.
8. To replace the communication settings in the terminal with the settings
in your runtime application, press Yes or the [F7] function key on the
terminal.
To Next Page
Loading...
