Coupling and uncoupling the machine
-X BAG0235.4 01.23
3. Direct people out of the danger area between the tractor and
machine before you approach the machine with the tractor.
4. Couple the PTO shaft and supply lines before coupling the ma-
chine and the tractor.
4.1 Drive the tractor up to the machine to leave a clearance of
approximately 10 in / 25 cm between tractor and machine.
4.2 Secure the tractor against unintentional starting and unin-
tentional rolling away.
4.3 Check whether the universal joint shaft of the tractor is
switched off.
4.4 Couple the PTO shaft and the supply lines to the tractor.
4.5 Align the lower link hooks so that they are flush with the
lower hinging points of the machine.
5. Now, reverse the tractor all the way to the machine so that the
lower link hooks of the tractor automatically pick up the ball
sleeves of the lower hinging points of the machine.
→ The lower link hooks lock automatically.
6. From the tractor seat, couple the upper link to the top attach-
ment point of the three-point attachment frame using the upper
link hook.
→ The upper link hooks lock automatically.
7. Perform a visual inspection to ensure that the upper and lower
link hooks are correctly locked before reversing the tractor.
To Next Page
Loading...
