1-10 | Model 900 ADA / Model 930 Sulfur Pit Analyzers
Supplemental Information – Where Can I Find It?
Some analyzers are configured with optional equipment that may require
supplemental information. The analyzer Operator’s Guide and this addi-
tional information (not part of the main manual) – collectively known as
the analyzer Documentation Package – is included with the manual.
If a CD-ROM of the analyzer Documentation Package is ordered, this
information is also included in the “Supplemental Information”
folder on the CD.
The Documentation Package shipped with each analyzer includes the
following:
• Manual Supplements that describe and illustrate installation, operation,
layout, and maintenance procedures for non-standard Measuring Cells*
or optional equipment*, non-standard (derivative) analyzer models,
or information that is intended to replace similar information in the
Operator’s Guide. (*These documents can also include a non-standard
Spare Parts List or a separate Custom Spare Parts List.)
• Analyzer Programming Parameters sheet, which lists the critical analyzer
operating parameters.
• EEPROM Data Sheets, which list the factory-default configuration set-
tings of all programmable analyzer parameters.
• Signed Final QC (Quality Control) Document, which includes AMETEK
Testing Quality Control information for the analyzer.
• Final As-Built drawings which are customer-specific drawings for the
analyzer system.
• Other customer-specific information may also be included (if appli-
cable), such as Product Data Sheets, a Custom Spare Parts list, or analyzer
Certificates.
An “Operator Interface Quick Reference Sheet,” which lists all of the
Function commands used to access analyzer parameters and other
information from the User Interface is shipped on the inside of the
analyzer’s Electronics Enclosure door.
NOTE
NOTE
To Next Page
Loading...
Need help?
General
