Ametek MX45-3Pi - 2.3 Regulatory

User Manual – Rev BE AMETEK Programmable Power
MX Series 32
Environmental
Parameter
Specification
Operating Temp:
0° to +35° C. (Except in CP mode).
+32° to +104° F.
Storage Temp:
-40° to +85 °C.
-40° to +185° F.
Altitude:
< 2000 meters
Relative Humidity:
0-95 % RAH, non-condensing maximum for temperatures up to 31°C decreasing linearly to 50% at 40°C.
Installation/ Over voltage Category:
ΙΙ
Pollution Degree:
2
Indoor Use Only
Vibration:
Designed to meet NSTA 1A transportation levels.
Shock:
Designed to meet NSTA 1A transportation levels.
2.3 Regulatory
Electromagnetic Emissions
and Immunity:
Designed to meet EN50081-2 and EN50082-2 European Emissions and
Immunity standards as required for the “CE” mark.
Ac o u s t i c No is e :
65 dBA maximum at 0% to 50% load, 75 dBA maximum greater than 50% load to 100% load.
Measured at one meter.
Safet y: Designed to EN 61010-1 European safety standards as required for the “CE” mark.