Ametek UPLC-II - Page 96

Page 5–4
UPLC-II™ System Manual
Table 5–1. Terminal Block Input Connections *
Table 5–2. Terminal Block Output Connections
Note:
A
LL inputs and outputs are non-polarity sensitive, except for the Power Supply Auxiliary output and the
external CLI output.
Inputs Terminal Block
Main Power Supply Input TB1-1 & 2
Redundant Power Supply Input TB2-1 & 2
Keying Input 1 TB3-5 & 10
Keying Input 2 TB3-4 & 9
Keying Input 3 TB3-3 & 8
Keying Input 4 TB3-2 & 7
Keying Input 5 TB3-1 & 6
Optional Trip Duty Contacts *
EM Output 1 (TD01) TB6-7 & 8
EM Output 2 (TD02) TB6-5 & 6
EM Output 3 (TD03) TB6-3 & 4
EM Output 4 (TD04) TB6-1 & 2
Power Supply Terminal
Alarms/Outputs Block
Main PS* TB1-5 & 6
Redundant PS* (Opt.) TB2-5 & 6
Opt. PS Aux.**
1
TB1-3(+) & 4(–)
Opt. Red. PS Aux.**
1
TB2-3(+) & 4(–)
Other Outputs
External CLI** TB7-3(+) & 4(–)
LL Outputs- Terminal
1A Transistor * Block
SS Output 1 (LL01) TB4-5 & 10
SS Output 2 (LL02) TB4-4 & 9
SS Output 3 (LL03) TB4-3 & 8
SS Output 4 (LL04) TB4-2 & 7
SS Output 5 (LL05) TB4-1 & 6
SS Output 6 (LL06) TB5-5 & 10
SS Output 7 (LL07) TB5-4 & 9
LL Outputs- Terminal
0.25A Contact * Block
EM Output 8 (LL08) TB5-3 & 8
EM Output 9 (LL09) TB5-2 & 7
EM Output 10 (LL10) TB5-1 & 6
* Non-Polarity Sensitive
** Polarity Sensitive
1
For Driving Older EM Relays