Page 59
6. Scroll up to the time field and press OK to change to flashing cursor for Edit Mode.
7. Use the Up/Down arrows to change the segment start time. Press OK.
8. Scroll to the grams field and press OK to change to flashing cursor
for Edit mode.
9. Use the Up/Down arrows to change the grams field as desired. Press
OK. Repeat to set remaining segments per your healthcare team’s
recommendations.
To review your settings, highlight the forward arrows and press OK to
scroll through each segment. Confirm the times and setting values are
correct.
When finished, scroll to Done and press OK to return to the Setup Adv screen.
To return to the Home screen, scroll to Home and press OK.
Setup Advanced 7 – Personal Settings - Insulin Sensitivity Factor (ISF)
Your healthcare team may recommend you use different Insulin Sensitivity Factors for
different times of day. When you use the ezCarb feature or ezBG, your pump will
automatically select the ISF for the current time of day.
This screen allows you to:
• Set different ISF’s for 12 different time slots
Note: If you set only one ratio, it will be used for the entire 24 hour period.
From the Setup Adv 7 screen, scroll up to ISF. Press OK.
1. The first segment always starts at midnight. The last time slot available is 11:30pm. Use
the Up/Down arrows to scroll to the BG units field.
2. Press OK to change to flashing cursor for Edit mode.
3. Use the Up/Down arrows to change to desired setting.
4. Press OK when setting is made.
5. To move to the next ISF screen, scroll to the forward arrows and press OK.
6. Scroll up to the time field and press OK to change to flashing cursor for Edit mode.
7. Use the Up/Down arrows to change the segment start time. Press OK.
8. Scroll to the BG units field and press OK to change to flashing cursor for Edit Mode.
11
To Next Page
Loading...