PC Software C-6 Working with the Localhost
MS2090A UG PN: 10580-00444 Rev. U C-9
FREQ SPAN
Changes here suppress recalled data.
AMPLITUDE
Changes to REF LEVEL, SCALE/DIV, Y AXIS UNIT will change the graticule. PRE AMP and ATTEN LEVEL
have no affect. All other changes will suppress recalled data.
BANDWIDTH
Changes here suppress recalled data.
TRACE
You can select different Traces or add Cursors if spectrogram data was captured. Most other trace settings
have no affect.
SWEEP
You can recall GATED SWEEP and PWR VS TIME data, and you can change the GATE DELAY. Most other
sweep settings have no affect.
MARKER
All marker measurements are available.
LIMIT
All limit line functions are available.
TRIGGER
Trigger functions have no affect.
MEASURE
Some measurements can be selected when the appropriate data is recalled. For example, a an Channel Power,
OBW, and ACP measurements can be applied to a normal spectrum trace.
SETUP
Setup parameters for Channel Power, OBW, and ACP can be adjusted.
PRESET
Preset functions will preset the selected items and suppress recalled measurement data.
To Next Page
