A-2 Self-Test Messages Instrument Notifications and Troubleshooting
A-4 PN: 10580-00444 Rev. U MS2090A UG
Thermal Sensor 2 (Mid-band 2nd IF) : 35.00 C, 90.00 C ,46.00 C (PASS)
Thermal Sensor 3 (Low-band RF) : 35.00 C, 90.00 C ,42.00 C (PASS)
DCM Temperature Not Available For This Option : 0.00 C, 0.00 C ,0.00 C (PASS)
ADC Thermal Sensor : 35.00 C, 90.00 C ,39.93 C (PASS)
If any self test fails, try resetting the instrument with a RESET ALL and reboot, and run the test again. If the
condition persists, contact your local Anritsu Service Center (http://www.anritsu.com/contact-us).
To Next Page
Loading...
