5-2 :CALCulate Subsystem VNA Commands
5-6 PN: 10580-00319 Rev. N S412E PM
:CALCulate<Tr>:LIMit:LOWer:POINt:RIGHt
Description: Sets the limit point to the right of the lower limit active point of the
given trace <Tr> as the new active point. <Tr> is the trace number in
the range 1 to 4. If no trace number is specified, then the <Tr>
parameter defaults to trace number 1.
Cmd Parameter: NA
Query Response: NA (no query)
Example: To make the lower limit point to the right of the current active point of
trace 2 as the new active point:
:CALCulate2:LIMit:LOWer:POINt:RIGHt
Front Panel Access: Shift 6 (Limit), Limit Edit, Next Point Right
To Next Page
Loading...
