5-7 :MMEMory Subsystem VNA Commands
5-48 PN: 10580-00319 Rev. N S412E PM
:MMEMory:LOAD:TRACe <integer>,<file name>
Description: Recalls a previously stored measurement trace from the current save
location. The saved measurement trace that is to be loaded is specified
by <file name>. <file name> must be enclosed in either single
quotes (‘ ’) or double quotes (“ ”) and must contain a file extension of
“.mna”. Note that the trace that is specified by <file name> must
be available at the current save location. The <integer> parameter is
not currently in use, but it must be sent. Send a 1.
File name extensions:
“.spa” for SPA measurement
“.mna” for VNA and VVM measurements
“.hipm” for HiPM measurements
“.pm” for PM measurements
“.cwsg” for CWSG measurements
“.afp” for AM/FM/PM measurements
“.ia” for Interference Analysis measurements
“.cs” for Channel Scanner measurements
“.wmxd” for WiMAX
“.wmxe” for Mobile WiMAX
“.lte” for LTE measurements
“.p25” for P25 measurements
“.p252” for P25p2 measurements
“.nxdn” for NXDN measurements
“.dpmr” for dPMR measurements
“.dmr2” for DMR 2 measurements
“.ptc” for PTC measurements
“.tetra” for TETRA measurements
“.nbfm” for NBFM measurements
Cmd Parameter: <integer>, <string> (1, file name)
Query Response: NA (no query)
Example: To recall trace with file name “trace”:
:MMEMory:LOAD:TRACe 1,“trace.mna”
Related Command: :MMEMory:STORe:TRACe
:MMEMory:MSIS INTernal|USB
Front Panel Access: Shift-7 (File), Recall
To Next Page
Loading...
