5-11 [:SENSe] Subsystem VNA Commands
5-82 PN: 10580-00319 Rev. N S412E PM
[:SENSe]:TRACe:TOTal <integer>
[:SENSe]:TRACe:TOTal?
Description: Sets the number of traces to display.
Cmd Parameter: <char> [1|2|3|4]
Query Response: <char> [1|2|3|4]
Default Value: 2
Range: 1to4
Example: To set number of traces to 3:
:SENSe:TRACe:TOTal 3
Front Panel Access: Measure, Number of Traces
[:SENSe]:TRACe:SELect?
Description: This command returns the current active trace number in the format
TR#.
Cmd Parameter: NA (query only)
Query Response: <char> [TR1|TR2|TR3|TR4]
Example: To query for the active trace number:
:SENS:TRAC:SEL?
Front Panel Access:Measure, Active Trace
To Next Page
Loading...
