EasyManua.ls Logo

Anritsu LMR Master S412E - Page 221

Anritsu LMR Master S412E
704 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fixed WiMAX Commands 7-9 :READ Subsystem
S412E PM PN: 10580-00319 Rev. N 7-21
Data is returned as 11 comma-delimited values: The Channel Power in
dBm, relative adjacent channel 1 power level, absolute adjacent channel
1 power level, relative adjacent channel 2 power level, absolute adjacent
channel 2 power level, relative adjacent channel 3 power level, absolute
adjacent channel 3 power level, relative adjacent channel 4 power level,
absolute adjacent channel 4 power level, relative adjacent channel 5
power level, absolute adjacent channel 5 power level. The relative
adjacent channel power level is in dB and the absolute adjacent channel
power level is in dBm.
Related Command: :FETCh:RF:ACPR?
:CONFigure:RF ACPR
:MEASure:RF:ACPR?
Front Panel Access: Measurements, RF Measurements, ACPR
:READ:RF:PVTime?
Title: Read Power vs. Time
Description: Triggers a new Power vs. Time measurement and returns the results:
Channel Power, Preamble power, burst power of data bursts, and the
Crest Factor. It is a combination of the commands :ABORT; :INITiate;
:FETCh:RF:PVTime? The Power vs. Time measurement must be the
active measurement (specified by :CONFigure:RF PVTime). The
current measurement can be queried using :CONFigure?
Data is returned as 4 comma-delimited values: The Channel Power in
dBm, Preamble power in dBm, burst power of data bursts in dBm, and
the Crest Factor in dB.
Related Command: :FETCh:RF:PVTime?
:CONFigure:RF PVTime
:READ:RF:SPECtrum?
Title: Read RF Spectrum
Description: Triggers a new RF Spectrum measurement and returns the results:
Channel Power (RSSI) and Occupied bandwidth measurement. It is a
combination of the commands :ABORT; :INITiate;
:FETCh:RF:SPECtrum? The Spectrum measurement must be the active
measurement (specified by :CONFigure:RF SPECtrum). The current
measurement can be queried using :CONFigure?
Data is returned as 2 comma-delimited values: Channel Power(RSSI) in
dBm and Occupied bandwidth measurement in MHz.
Related Command: :FETCh:RF:SPECtrum?
:CONFigure:RF SPECtrum
:MEASure:RF:SPECtrum?

Table of Contents

Related product manuals