Fixed WiMAX Commands 7-10 :TRACe Subsystem
S412E PM PN: 10580-00319 Rev. N 7-23
CHANNEL Current channel
POWER_OFFSET Applied power offset
REFERENCE_FREQUENCY Selected external reference frequency
UNITS Amplitude units
CURRENT_VIEW Current view
CURRENT_MEASURMENTS Current measurements
DYNAMIC_ATTENUATION Dynamic range on/off
SPAN Frequency span
PVT_FRAME_START_TIME Power vs. Time start time
PVT_FRAME_STOP_TIME Power vs. Time stop time
BW_SELECT Current Bandwidth (MHz)
CURRENT_SPECTRUM_VIEW Current spectrum view (single or multiple channel
spectrum)
I_Q_VIEW IQ view
RUN_HOLD Run/Hold on/off
TEST_MODEL Current pass fail model being tested
CP_RATIO Cyclic Prefix Ratio (the value is the index of the CP
Ratio list, where a value of 0 is the first index in the
list)
SPECTRUM_SPAN Spectrum frequency span (the value is the index of the
span list, where a value of 0 is the first index in the list
AUTO_SPAN Auto span on/off
MAX_HOLD Max hold on/off
EVM_SUB_CARRIER_TOP Y Axis Max for EVM vs. Symbol/Sub-Carrier
EVM_SUB_CARRIER_SCALE EVM vs. Symbol/Sub-Carrier scale
SPECTRAL_FLATNESS_SCALE Spectral Flatness scale
ACPR_DISPLAY_GRAPH Display ACPR trace on/off
NUM_OF_ACPR_MAIN_CHANNELS Number of main channels
NUM_OF_ACPR_ADJC_CHANNELS Number of adjacent channels
CONSTELLATION_REFERENCE_POI
NTS
Constellation reference points on/off
SPECTRAL_FLATNESS_TOP Y Axis Max for Spectral Flatness
SPECTRAL_FLATNESS_EVM_SUB_S
TART
Spectral Flatness/EVM vs. sub-carrier start
SPECTRAL_FLATNESS_EVM_SUB_S
TOP
Spectral Flatness/EVM vs. sub-carrier stop
EVM_SYM_START EVM vs. Symbol start
Table 7-1. Available Parameters in WiMAX and Mobile WiMAX Mode (Sheet 2 of 3)
Parameter Name Description
To Next Page
Loading...
