Fixed WiMAX Commands 7-11 [:SENSe] Subsystem
S412E PM PN: 10580-00319 Rev. N 7-31
[:SENSe]:RF:PVTime:FRAMe:STOP?
Title: Power vs. Time Frame Stop Time
Description: Queries the Power vs. Time frame stop time.
Default Unit: seconds
Related Command: :RF:PVTime:FRAMe:STARt?
:DLFLength?
[:SENSe]:RF:SPECtrum:SPAN 5|10|20|30
[:SENSe]:RF:SPECtrum:SPAN?
Title: Spectrum View Span
Description: Sets the span for the Spectrum view. Setting the value to 5 will set the
span for the Spectrum view to 5 MHz. Setting the value to 10 will set
the span for the Spectrum view to 10 MHz. Setting the value to 20 will
set the span for the Spectrum view to 20 MHz. Setting the value to 30
will set the span for the Spectrum view to 30 MHz.
Parameter: 5|10|20|30
Default Value: 5 MHz
Default Unit: MHz
Front Panel Access: Measurements, RF Measurements, Spectrum, Span
To Next Page
Loading...
