Anritsu LMR Master S412E - Chapter 8 - Mobile WiMAX Commands; 8-1:ABORt Subsystem; Chapter 8-Mobile WiMAX Commands

S412E PM PN: 10580-00319 Rev. N 8-1
Chapter 8 — Mobile WiMAX
Commands
8-1 :ABORt Subsystem
The abort subsystem includes commands that allow the user to stop current measurement
activities on the instrument.
:ABORt
Title: Abort
Description: Restarts the current sweep and/or measurement. Resets the trigger
system. If :INITiate:CONTinuous is OFF (i.e., the instrument is in
single sweep mode), send the command :INITiate[:IMMediate] to
trigger the next sweep. If :INITiate:CONTinuous is ON (i.e., the
instrument is in continuous sweep mode), a new sweep will start
immediately.
Parameter: NA
Related Command: :INITiate:CONTinuous
:INITiate[:IMMediate]