8-11 [:SENSe] Subsystem Mobile WiMAX Commands
8-24 PN: 10580-00319 Rev. N S412E PM
8-11 [:SENSe] Subsystem
The commands in this subsystem relate to device-specific parameters, not signal-oriented
parameters.
[:SENSe]:BANDwidth|BWIDth[:RESolution] <index>
[:SENSe]:BANDwidth|BWIDth[:RESolution]?
Title: Resolution Bandwidth
Description: Sets the resolution bandwidth. The <index> argument is a 1-based
index of the position of the desired bandwidth in the instrument’s
current bandwidth list. The list can be displayed on the instrument by
choosing the “BW” submenu button in the “Setup” menu. For example,
if the desired bandwidth is the 3rd item on the list then the value of the
<index> argument would be 3.
The query form of this command will return the index of the currently
selected bandwidth on the list. The Default is the 1st index in the
bandwidth list.
Parameter: <index>
Default Value: The default bandwidth is 5 MHz which is the 1st index in the
bandwidth list.
Front Panel Access: Setup, BW
[:SENSe]:DEMod:CONStln:REFPoints[:STATe] OFF|ON|0|1
[:SENSe]:DEMod:CONStln:REFPoints[:STATe]?
Title: Constellation Reference Points
Required Option: 47
Description: Sets the display of the reference points for the various constellations
on/off.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: ON
Front Panel Access: Measurements, Demodulator, Constellation, Reference Points
To Next Page
Loading...
