9-11 [:SENSe] Subsystem LTE Commands
9-22 PN: 10580-00319 Rev. N S412E PM
[:SENSe]:CC{1|2|3|4|5}:CHANnel <number>
[:SENSe]:CC{1|2|3|4|5}:CHANnel?
Title:
Component Carrier Channel
Description:
Sets the channel number for the selected signal standard for the
specified Component Carrier (CC).
Parameter:
<number>
Front Panel Access: Measurements, Over-the-Air, Carrier Aggregation, CC#, CC#, Channel
[:SENSe]:CC{1|2|3|4|5}:FREQuency <freq>
[:SENSe]:CC{1|2|3|4|5}:FREQuency?
Title:
Component Carrier Frequency
Description:
Sets the center frequency of the specified Component Carrier (CC).
Parameter:
<freq>
Parameter Type:
<NRf>
Front Panel Access: Measurements, Over-the-Air, Carrier Aggregation, CC#, CC#, Center
Freq
[:SENSe]:CC{1|2|3|4|5}:SIGStandard <string>
[:SENSe]:CC{1|2|3|4|5}:SIGStandard?
Title:
Component Carrier Signal Standard
Description:
Selects the desired signal standard from the list. The <string>
argument is the name of the desired signal standard as displayed in the
instrument’s current signal standard list. The list can be displayed on
the instrument by choosing the Signal Standard submenu button in the
Freq menu. The list can also be downloaded remotely and viewed using
Anritsu Master Software Tools. For example, if the desired Signal
Standard is P-GSM 900 - Uplink, then the value of the <string>
argument would be “P-GSM 900 - Uplink”.
The query form of this command returns the name of the currently
selected Signal Standard from the list.
Parameter:
<string>
Parameter Type:
<char>
Front Panel Access: Measurements, Over-the-Air, Carrier Aggregation, CC#, CC#, Signal
Standard
To Next Page
Loading...
