Anritsu LMR Master S412E - Page 290

10-2 :CONFigure Subsystem P25 Phase 1 Commands
10-4 PN: 10580-00319 Rev. N S412E PM
:CONFigure:COVerage
Description: This command configures the P25 Coverage measurement. Certain
settings from the previous measurement (Mapping Type) will be backed
up when exiting this measurement and restored when entering this
measurement. All other settings carry over from one measurement to
the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to P25 Coverage:
:CONFigure:COVerage
Front Panel Access: Measurement, P25 Coverage
:CONFigure:SIGAnalyzer
Description: This command configures the P25 Analyzer measurement. Certain
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to P25 Analyzer:
:CONFigure:SIGAnalyzer
Front Panel Access:Measurement, P25 Analyzer