Anritsu LMR Master S412E - Page 378

12-2 :CONFigure Subsystem NXDN Commands
12-4 PN: 10580-00319 Rev. N S412E PM
:CONFigure:COVerage
Description: This command configures the NXDN Coverage measurement. Certain
settings from the previous measurement (Mapping Type) will be backed
up when exiting this measurement and restored when entering this
measurement. All other settings carry over from one measurement to
the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NXDN Coverage:
:CONFigure:COVerage
Front Panel Access: Measurement, NXDN Coverage
:CONFigure:SIGAnalyzer
Description: This command configures the NXDN Analyzer measurement. Certain
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NXDN Analyzer:
:CONFigure:SIGAnalyzer
Front Panel Access: Measurement, NXDN Analyzer