14-2 :CONFigure Subsystem DMR 2 Commands
14-4 PN: 10580-00319 Rev. N S412E PM
:CONFigure:SIGAnalyzer
Description: This command configures the DMR 2 Analyzer measurement. Certain
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to DMR 2 Analyzer:
:CONFigure:SIGAnalyzer
Front Panel Access: Measurement, DMR 2 Analyzer
To Next Page
Loading...
