DMR 2 Commands 14-11 :TRACe Subsystem
S412E PM PN: 10580-00319 Rev. N 14-31
GPS_FIX_LONGITUDE
Current longitude shown in degrees, minutes,
seconds. Even if a file has been recalled, the current
longitude will be returned.
GPS_FIX_LATITUDE
Current latitude shown in degrees, minutes, seconds.
Even if a file has been recalled, the current latitude will
be returned.
GPS_FIX_VALUE_TIME
Current UTC time shown as seconds elapsed since
0:00 January 1st, 1970. Even if a file has been
recalled, the current UTC time will be returned.
GPS_FIX_VALUE_LON
Current longitude shown in radians (as a long data
type). Even if a file has been recalled, the current
longitude will be returned.
GPS_FIX_VALUE_LAT
Current latitude shown in radians (as a long data
type). Even if a file has been recalled, the current
latitude will be returned.
RECEIVER_FREQ Receiver (Rx) frequency.
EXT_ATT Receiver (Rx) power offset.
REF_LVL
Reference level. For Analyzer, this setting
corresponds to the Spectrum graph.
REF_LVL_TX Backup reference level for Analyzer.
REF_LVL_TOC
Backup reference level for Coverage (Not in use with
new mapping style).
SCALE
Scale. For Analyzer, this setting corresponds to the
Spectrum graph.
SCALE_TX Backup scale for Analyzer.
SCALE_TOC
Backup scale for Coverage (Not in use with new
mapping style).
TOC_BER_REF
BER reference percentage (Not in use with new
mapping style).
TOC_MOD_FID_REF
Mod fid reference percentage (Not in use with new
mapping style).
GRAPH_TYPE Graph type of the selected graph (Active graph).
GRAPH_TYPE_TX Backup graph type for Analyzer.
GRAPH_TYPE_TOC
Backup graph type for Coverage (Not in use with new
mapping style).
TRACE_GRAPH_TYPES
Graph types for all 4 traces. This uses a bit mask shift,
where the bit shift mask is defined as:
GRAPH_TYPE_BIT_SHIFT 16
GRAPH_TYPE_BIT_MASK 0xFFFF
TRACE_GRAPH_TYPES_TX Backup trace graph type for Analyzer.
Table 14-1. Returned Parameter Values in Trace Preamble (Sheet 2 of 7)
Parameter Name Description
To Next Page
Loading...
