Anritsu LMR Master S412E - Page 553

NBFM Commands 16-2 :CONFigure Subsystem
S412E PM PN: 10580-00319 Rev. N 16-3
:CONFigure:COVerage
Description: This command configures the NBFM Coverage measurement. Certain
settings from the previous measurement (Mapping Type) will be backed
up when exiting this measurement and restored when entering this
measurement. All other settings carry over from one measurement to
the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NBFM Coverage:
:CONFigure:COVerage
Front Panel Access: Measurement, NBFM Coverage
:CONFigure:QUIeting
Description: This command configures the NBFM Quieting measurement.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NBFM Quieting:
:CONFigure:QUIeting
Front Panel Access: Measurement, NBFM Quieting