Anritsu LMR Master S412E - Page 554

16-2 :CONFigure Subsystem NBFM Commands
16-4 PN: 10580-00319 Rev. N S412E PM
:CONFigure:SIGAnalyzer
Description: This command configures the NBFM Analyzer measurement. Certain
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NBFM Analyzer:
:CONFigure:SIGAnalyzer
Front Panel Access: Measurement, NBFM Analyzer
:CONFigure:SNDRatio
Description: This command configures the NBFM SINAD measurement.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NBFM SINAD:
:CONFigure:SNDRatio
Front Panel Access: Measurement, NBFM SINAD