Spectrum Analyzer Commands 4-2 :CALCulate Subsystem
S412E PM PN: 10580-00319 Rev. N 4-17
:CALCulate:MARKer{1|2|3|4|5|6}:FIXed[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}:FIXed[:STATe]?
Title: Marker Fixed State
Description: Sets the specified reference marker fixed state on or off. If Fixed is set to
on, then the selected reference markers stay at the amplitude they were
at when the marker is set to Fixed.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To set reference marker #1 to fixed:
:CALCulate:MARKer:FIXed ON
:CALCulate:MARKer:FIXed 1
Front Panel Access: Marker, More, Marker Style (Fixed)
:CALCulate:MARKer{1|2|3|4|5|6}:MAXimum
Title: Marker (Maximum) Peak Search
Description: Puts the specified marker at the maximum amplitude in the trace.
Front Panel Access: Marker, Marker [1/2/3/4/5/6], Peak Search
Marker, Marker [1/2/3/4/5/6], More Peak Options, Peak Search
:CALCulate:MARKer{1|2|3|4|5|6}:MAXimum:LEFT
Title: Marker (Maximum) Peak Search Left
Description: Puts the specified marker on the next highest peak to the left of the
current peak. The next highest peak must be above the peak threshold.
If no point meets that criterion, the marker is set to the first point on
the trace.
Related Command: :CALCulate:MARKer:PEAK:THReshold
Front Panel Access: Marker, More Peak Options, Next Peak Left
:CALCulate:MARKer{1|2|3|4|5|6}:MAXimum:RIGHt
Title: Marker (Maximum) Peak Search Right
Description: Puts the specified marker on the next highest peak to the right of the
current peak. The next highest peak must be above the peak threshold.
If no point meets that criterion, the marker is set to the last point on the
trace.
Related Command: :CALCulate:MARKer:PEAK:THReshold
Front Panel Access: Marker, More Peak Options, Next Peak Right
To Next Page
Loading...
