17-13 [:SENSe] Subsystem TETRA Commands
17-38 PN: 10580-00319 Rev. N S412E PM
[:SENSe]:SYMBolspan <value>
[:SENSe]:SYMBolspan?
Description: Sets the symbol span. Please note that this setting only affects the
Eye Diagram in the TETRA Analyzer measurement. Please note that
setting the symbol span will restart the sweep.
Cmd Parameters: <value>
Query Parameters: NA
Range: 2 to 5
Default Value: 2
Default Unit: NA
Example: To set the symbol span to 4:
:SYMBolspan 4
Front Panel Access: Measurement, TETRA Analyzer, Symbol Span
To Next Page
Loading...
