4-11 :TRACe Subsystem Spectrum Analyzer Commands
4-44 PN: 10580-00319 Rev. N S412E PM
:TRACe{1|2|3}:DISPlay[:STATe] OFF|ON|0|1
:TRACe{1|2|3}:DISPlay[:STATe]?
Title: Trace View State
Description: Specifies whether the specified trace should be displayable (visible) or
hidden. TRACe1 corresponds to Trace A, TRACe2 corresponds to Trace
B, and TRACe3 corresponds to Trace C. Setting the value to ON or 1
will set the specified trace visible. Setting the value to OFF or 0 will set
the specified trace hidden. Note that issuing this command will also set
the specified trace as active trace.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: ON for Trace A
OFF for Trace B
OFF for Trace C
Example: To set Trace A to Blank:
:TRACe:DISPlay OFF
:TRACe1:DISPlay 0
To set Trace B to View:
:TRACe2:DISPlay ON
:TRACe2:DISPlay:STATe ON
:TRACe2:DISPlay 1
Front Panel Access: Shift-5 (Trace), View/Blank
To Next Page
Loading...
