4-11 :TRACe Subsystem Spectrum Analyzer Commands
4-46 PN: 10580-00319 Rev. N S412E PM
:TRACe{1|2|3}:WRITe[:STATe] OFF|ON|0|1
:TRACe{1|2|3}:WRITe[:STATe]?
Title: Trace Write State
Description: Specifies whether the specified trace state should be set to write or hold.
TRACe1 corresponds to Trace A, TRACe2 corresponds to Trace B, and
TRACe3 corresponds to Trace C. Setting the state to ON or 1 will set the
specified trace to write. Setting the state to OFF or 0 will set the
specified trace to hold.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: ON for Trace A
OFF for Trace B
OFF for Trace C
Example: To set Trace A to Hold:
:TRACe:WRITe:STATe OFF
:TRACe:WRITe OFF OR :TRACe:WRITe 0
To set Trace C to Write:
:TRACe3:WRITe ON
:TRACe3:WRITe:STATe ON
:TRACe3:WRITe 1
Related Command: :TRACe:DATA
Front Panel Access: Shift-5 (Trace), Write/Hold
To Next Page
Loading...
