Spectrum Analyzer Commands 4-14 [:SENSe] Subsystem
S412E PM PN: 10580-00319 Rev. N 4-53
[:SENSe]:ACPower:STATe OFF|ON|0|1
[:SENSe]:ACPower:STATe?
Title: ACPR Measurement State
Description: Sets the state of the adjacent channel power ratio measurement, ON or
OFF. When using :CONFigure:ACPower, the state is automatically set
to ON.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
[:SENSe]:AVERage:COUNt <integer>
[:SENSe]:AVERage:COUNt?
Title: Number of Traces to Average
Description: Sets the number of traces to average.
Parameter: <integer>
Parameter Type: <integer>
Default Value: 10
Range: 2 to 65535
Front Panel Access: Shift-5 (Trace), Trace A Operations, # of Averages
To Next Page
Loading...
