MS2721B MM PN: 10580-00177 Rev. D 3-1
Chapter 3 — Performance Verification 2
3-1 Introduction
This chapter contains test procedures that can be used to verify Options that may be installed in the
Spectrum Master Model MS2721B. Blank performance verification test records are provided in Appendix A.
Make a copies of the blank test records and use them to record measured values.
3-2 Optional Functions Verification
This part of the Performance Verification chapter contains instructions to verify the functions of options that
may be installed in the Spectrum Master Model MS2721B
• Tracking Generator (Option 20) Verification
• ISDB-T Signal Analyzer (Option 30) Verification
• ISDB-T SFN Analyzer (Option 32) Verification
• GPS Option Verification (Option 31)
• GSM/GPRS/EDGE Signal Analyzer (Options 40 and 41) Verification
• “CDMA Signal Analyzer (Options 42 and 43) Verification”
• “WCDMA/HSDPA Signal Analyzer (Options 44, 45, and 65) Verification”
• “Fixed WiMAX Signal Analyzer (Options 46 and 47) Verification”
• “TD-SCDMA Signal Analyzer (Options 60 and 61) Verification”
• “EVDO Signal Analyzer Option Verification (Options 62 and 63)”
• “DVB-T/H Signal Analyzer (Options 64 and 57) Verification”
• “Mobile WiMAX Signal Analyzer (Options 66 and 67) Verification”
• “LTE Signal Analyzer (Options 541 and 542) Verification”
• “DVB-T/H SFN Analyzer (Option 78) Verification”
Note Allow all instruments to warm up to typical operating temperature before taking test readings.
To Next Page
Loading...
Need help?
General
