Anritsu Spectrum Master MS2721B Maintenance Manual

3-6 ISDB-T SFN Analyzer (Option 32) Verification Performance Verification 2
3-24 PN: 10580-00177 Rev. D MS2721B MM
3-6 ISDB-T SFN Analyzer (Option 32) Verification
Introduction
The tests in this section verify the performance of the optional ISDB-T SFN Analyzer option of the MS2721B.
These tests include:
• Level Accuracy Verification
• 1 dB Compression Level Verification
• Noise Floor Verification
Level Accuracy Verification
The tests in this section verify the level accuracy of the MS2721B in ISDB-T SFN Analyzer mode.
Required Equipment:
• Anritsu MG3700A Vector Signal Generator
• Programmable Attenuator, Anritsu Model MN63A
• Power Meter, Anritsu Model ML2438A
• RF Power Amplifier, Mini Circuits Model TIA-1000-1R8
• Power Sensor, Anritsu Model MA2482D (2)
• Power Splitter, Aeroflex⁄Weinschel Model 1870A
• Fixed Attenuator, Aeroflex/Weinschel Model 44-10
• Anritsu 1N50C RF Limiter
• Adapter, Anritsu Model 34NN50A
• Adapter, Midwest Microwave ADT-2615-NF-BNM-02 (2)
• RF Coaxial Cable, Anritsu Model 15NN50-1.5C (3)
• Spectrum Master Model MS2721B

Anritsu Spectrum Master MS2721B Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2721B
Category	Measuring Instruments
Language	English