Anritsu Spectrum Master MS2721B Maintenance Manual

3-4 ISDB-T Signal Analyzer (Option 30) Verification Performance Verification 2
3-10 PN: 10580-00177 Rev. D MS2721B MM
30. Wait until Average (10/10) appears at the top of the display.
31. Record the Frequency Error in Table A-45.
Level Accuracy Verification
The tests in this section verify the level accuracy of the MS2721B in ISDB-T Signal Analyzer mode.
Required Equipment:
• Anritsu MG3700A Vector Signal Generator
• Programmable Attenuator, Anritsu Model MN63A
• Power Meter, Anritsu Model ML2438A
• Power Sensor, Anritsu Model MA2482D (2)
• Anritsu 1N50C RF Limiter
• Adapter, Anritsu Model 34NN50A
• RF Coaxial Cable, Anritsu Model 15NN50-1.5C
• Power Splitter, Aeroflex⁄Weinschel Model 1870A
• Fixed Attenuator, Aeroflex/Weinschel Model 44-10
• RF Power Amplifier, Mini Circuits Model TIA-1000-1R8
• Midwest Microwave ADT-2615-NF-BNM-02 Adapters (2)

Anritsu Spectrum Master MS2721B Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2721B
Category	Measuring Instruments
Language	English