Applied Biosystems 7300 User Manual

Chapter 2 Unpacking and Setting Up the Instrument
Before You Begin
8 Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Installation and Maintenance Guide
Notes
Before You Begin
Note: You can also use the Real-Time System Setup wizard to perform the procedures in
this guide. To access the wizard, insert the installation CD in the CD drive of the
computer. The wizard starts automatically after a short delay when you insert the CD.
Time Required 45 minutes
Materials
Required
Getting Started Before you begin installing the Applied Biosystems 7300/7500/7500 Fast Real-Time
PCR System:
• Set up the computer as described in the Applied Biosystems Real-Time PCR System
Computer Setup Guide
•Read the Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Site
Preparation Guide (P/N 4378654) and complete the preinstallation checklist
contained in the guide.
• Obtain the materials required for installation as shown above.
•Read “Selecting Additional Hardware and Software” on page 9 and, if necessary,
obtain the additional components you want to install.
Powder-free
gloves
Safety glassesScissors or
box cutters
Phillips
screwdriver
(small and thin)

Applied Biosystems 7300 Specifications

General

Brand	Applied Biosystems
Model	7300
Category	Laboratory Equipment
Language	English