Chapter 2 Unpacking and Setting Up the Instrument
Setting Up the 7300/7500/7500 Fast Instrument
22 Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Installation and Maintenance Guide
Notes
9. Close the tray door, then press the power button
again to power off the instrument.
Note: When closing
the instrument tray
door, apply pressure to
the right side of the
tray and at an angle.
If you have additional hardware that you want to
install (see page 9), do so now.
Do not connect the USB cable to
the 7300/7500/7500 Fast instrument or computer at
this time.
Press
here
Press
here