Applied Systems Engineering BCOM-USB User Manual

ASE2000 V2 Communication Test Set User Manual 120
4. Refer to the Device Manager screen and there should be two new entries under Other devices
for the “No driver Found” BCOM-USB ports.
5. At this point, manually direct Windows to install the drivers. Under Other devices, right-click
on the rst “ASEBCOM USB/2-Ch Serial” entry and select “Update Driver Software”. It is
extremely important these entries are selected in the correct order so that the COM
ports will be assigned to the BCOM-USB ports in the correct order.

Applied Systems Engineering BCOM-USB Specifications

General

Brand	Applied Systems Engineering
Model	BCOM-USB
Category	Measuring Instruments
Language	English