Applied Systems Engineering BCOM-USB User Manual

ASE2000 V2 Communication Test Set User Manual 143
24.2.3. CDC Type II – Task Mode RTU Simulation
Task Mode RTU Simulation utilizes the RTU and Point Data previously congured for the device
to generate responses to master commands for data values.
When RTU Simulation mode is selected
, the Raw and Increment elds on the Point
List view are enterable. This provides the capability of changing the simulation value for individual
points and to control whether the value will change (Increment value) on successive scans.

Applied Systems Engineering BCOM-USB Specifications

General

Brand	Applied Systems Engineering
Model	BCOM-USB
Category	Measuring Instruments
Language	English