Applied Systems Engineering BCOM-USB User Manual

ASE2000 V2 Communication Test Set User Manual 138
23.2.3. CDC Type I – Task Mode RTU Simulation
Task Mode RTU Simulation utilizes the RTU and Point Data previously congured for the device
to generate responses to master commands for data values. When RTU Simulation mode is
selected
, the Raw and Increment elds on the Point List view are enterable. This
provides the capability of changing the simulation value for individual points and to control
whether the value will change (Increment value) on successive scans.

Applied Systems Engineering BCOM-USB Specifications

General

Brand	Applied Systems Engineering
Model	BCOM-USB
Category	Measuring Instruments
Language	English