Chapter 4 Maintenance
HA-8180V 4-42
4.5 Recording Maintenance
4.5.1 Recording the Date of Maintenance
After replacing or cleaning parts, the instrument automatically records that date. You can use this information as a
reference for the next time maintenance is needed. Maintenance dates can also be manually entered after performing
tasks that do not provide automatic recording or when you want to change the recorded dates.
1 Access the maintenance screen.
a Access the desired screen.
Piercing nozzle
On the standby screen, select , <7 Maintenance menu>,
<6 Maintenance log menu> and <1 Piercing nozzle> in that
order.
Dilution container and washing container
On the standby screen, select , <7 Maintenance menu>,
<6 Maintenance log menu> and <2 Dilution and washing
containers> in that order.
Mesh filters of reagent nozzles and drain pinch valves
On the standby screen, select , <7 Maintenance menu>,
<6 Maintenance log menu> and <3 Others> in that order.
2 Enter the date.
a Enter the date.
• Hyphen button: Moves the cursor through the date in the order of “day”, “month” and “year”.
button: Moves the cursor to the next setup field.
b Press .
• The message “Settings changed. Save setting changes?” will appear.
c Press .
• This saves your entries and will return you to the [Maintenance log menu] screen.
d To return to the standby screen, press three times.
Piercing nozzle
(7610) 10-06-2010 10:00
Piercing nozzle cleaning
<09-06-10>
Nozzle washing block maintenance
<09-06-10>
Piercing nozzle replacement
<01-01-10>
PrevItem BS OK Cancel
To Next Page
Loading...
Need help?
General
