HA-8180V 3-26
Chapter 3 Auxiliary Operations
3.6.2 Printing a List of Barcode Errors
You can print out a list of measurement results for which the barcodes were misread on a specific day.
a On the standby screen, select , <6 Print menu> and <2 Barcode errors> in that order.
b Set the setup items.
• See the table below.
• button: Moves the cursor to the next setup field.
Hyphen button: Moves the cursor through the date in the order
of “day”, “month” and “year”. Or, changes the
option.
c Press .
• Printing will start.
• The [Print menu] screen will appear again when printing is
complete.
d To return to the standby screen, press twice.
Printed report example: See “2.9.5. List of Barcode Errors” on page 2-47.
Menu
Barcode errors
(6200) 10-06-2010 10:00
Date (DD-MM-YY)
<10-06-10>
Measurement mode
[Variant ]
PrevItem BS OK Cancel
If “None found.” appears on the display:
No match is found for the specified date. Press to return to the screen shown in step b.
To stop printing, press or .
Setup item Description
Date (DD-MM-YY) Set a measurement date.
Settable range: 01-01-00 to 31-12-99
Measurement mode Select one or both of the measurement modes for which to print a list. The default is the
current measurement mode.
Variant : Variant mode
Fast : Fast mode
Variant & Fast : Both modes
To Next Page
Loading...
