Chapter 6 Appendix
HA-8180V 6-2
6.1 Printed Report Examples
This section gives you examples of printed reports on the instrument’s parameter settings and diagnosis results.
6.1.1 Current Parameter Settings
You can view the current parameter settings for timers, column pressure unit, the printer and others.
Example
Printing instructions: See “3.6.5. Printing the Current Parameter Settings” on page 3-28.
*** HA-8180V VXX.XX ***
Parameter settings
10-06-2010 10:00
Serial No. 00000000
========================
Counter
Column
<0941>
Total
<0001242>
Variant Total
<0001242>
Sample
<0001120>
Control
<0000052>
Fast Total
<0000000>
Sample
<0000000>
Control
<0000000>
========================
Reagent information
Lot No. Expiry
Elu. 80A 0A1101 2011-01
Elu. 80B 0C1112 2011-03
Elu. 80CV 0D3331 2011-04
Wash 80H 9L1121 2010-12
Calib. CA89C05 2011-05
========================
Timer setup
Startup timer
[
Use
]
Monday
[
Not start
]
<00:00>
Tuesday
[
Not start
]
<00:00>
Wednesday
[
Not start
]
<00:00>
Thursday
[
Not start
]
<00:00>
Friday
[
Not start
]
<00:00>
Saturday
[
Not start
]
<00:00>
Sunday
[
Not start
]
<00:00>
Shutdown timer
<00:00>
========================
Startup timer: Settings for each day
Number of measurements for each mode and
type of measurement
Reagent information
Hyphens (---) appear if no reagent information has been set.
Print date
Serial number of the instrument
Column measurement counter
Startup timer: Use/Not use
Shutdown timer setting
To Next Page
Loading...
