HA-8180V 2-46
Chapter 2 Measurement
HbA1C and HbF measurement results
The following indications are included in printouts if inaccurate measurement results were obtained.
2.9.3 List of Measurement Results
The instrument automatically prints out a list of measurement results at the end of a batch of measurements. This report
can be reprinted if needed. You can select results to print by measurement mode (See “3.4.1. Printing/Transmitting
Results” on page 3-15).
Example (when [Variant & Fast] is selected)
Example (when using the internal barcode reader)
*1: See “2.9.1. Displayed Results Report” on page 2-44.
*2: “Var.” and “Fast” indicate when the measurement mode is changed if the list is printed with <Measurement
mode> set to <Variant & Fast> (see “3.4.1. Printing/Transmitting Results” on page 3-15).
Indication Description
--.- An abnormal measurement result was obtained. “****** Abnormal Fraction ******” will be printed, and
then below the chromatogram, a message about the abnormal value will be printed (see “5.4.
Abnormal Result Messages” on page 5-20).
Pass Measurement was not performed due to instructions from the external device.
Reagent information can be added to the end of the measurement result reports. See “3.8. Reagent Information
Settings” on page 3-38.
Measurement results
10-06-2010
10:00
Port No.
HbA1c
HbF
Meas No.
Var.
0001
0001
30
4.5
0.5
0002
0002
41
5.6
0.6
A1c Cont
0001
9006
36
5.1
0.9
0002
9007
99
11.1
0.8
STAT No.
0001
----
41
5.6
0.5
Meas No.
Fast
0003
0013
30
4.5
0.7
0004
0014
---
--.-
--.-
Measurement number and port number *1
Measurement results
(HbA1C mmol/mol, %, HbF %)
--.-
: Abnormal measurement result
Print date and time
Type of measurement *1
Measurement mode: Var. (Variant) or Fast *2
ID
HbA1c
HbF
Meas No.
0001
012345678901234567
30
4.5
0.5
Type of measurement
ID
Measurement number
To Next Page
Loading...
Need help?
General
