HA-8180V 3-32
Chapter 3 Auxiliary Operations
3.7.4 Printing Optical Unit Monitoring Results
The optical unit monitoring result report shows the changes in light absorption of the optical unit over the last
10 minutes.
a On the standby screen, select , <8 Instrument diagnosis menu> and <3 Monitor print> in that order.
• Printing will start.
• The [Instrument diagnosis menu] screen will appear again when printing is complete.
b To return to the standby screen, press twice.
Monitoring is performed for the same duration of time in both the Variant and Fast modes.
Printed report example: See “6.1.3. Optical Unit Monitoring Results” on page 6-5.
Menu
To Next Page
Loading...
