Chapter 1 Before Use
HA-8180V 1-12
1.3 Part Names and Functions
1.3.1 Front and Right Side Views
Drive units are housed inside the instrument. Power is shut off automatically if the front cover,
maintenance cover or side cover is opened during instrument operation. Do not open these
covers unless necessary.
No. Component Description
a Standby switch Used to turn the instrument on/off for daily use. The switch is fitted with a cover to
prevent accidental operation.
Immediately after power turns on: Orange
While power is on: Green
In sleep mode: Orange
b Front cover Protects the measurement unit including the temperature control box.
Measurements cannot be made if this cover is open.
c Operator panel See “1.7. Basic Operations” on page 1-41.
d Display Status information, measurement results and warning/error/trouble messages are
displayed here.
e Printer Thermal printer. Prints measurement results and other information.
f Bottle caps with nozzle
(× 4)
Attach these caps to eluent packs and hemolysis washing solution bottle.
For use with eluent A pack (bottle cap A): Blue
For use with eluent B pack (bottle cap B): Red
For use with eluent CV pack (bottle cap CV): Yellow
For use with hemolysis washing solution bottle (bottle cap H):
Colorless, with fluid level detection sensor
To Next Page
Loading...
