Arkray ADAMS A1C HA-8180V - 2.9.4 List of Abnormal Results; 2.9.5 List of Barcode Errors

HA-8180V 2-47
2.9.4 List of Abnormal Results
The list of abnormal results contains the measurement numbers and messages of the results for which “Abnormal
Fraction” appeared on the measurement result reports. The instrument automatically prints this report at the end of a
batch. This report can be reprinted if needed. See “3.6.3. Printing a List of Abnormal Results” on page 3-27.
Example
*1: “Var.” and “Fast” indicate when the measurement mode is changed if the list is printed with <Measurement
mode> set to <Variant & Fast> (see “3.6.3. Printing a List of Abnormal Results” on page 3-27).
2.9.5 List of Barcode Errors
The list of barcode errors contains measurement results for which the barcode was not correctly read. The instrument
automatically prints this report at the end of a batch. This report can be reprinted if needed. See “3.6.2. Printing a List
of Barcode Errors” on page 3-26.
Example
*1: “Var.” and “Fast” indicate when the measurement mode is changed if the list is printed with <Measurement
mode> set to <Variant & Fast> (see “3.6.2. Printing a List of Barcode Errors” on page 3-26).
REFERENCE:
Abnormal result messages: See “5.4. Abnormal Result Messages” on page 5-20.
Abnormal results
10-06-2010 10:00
Port No. Error
Meas. No.
Var.
0001 0001 Drift baseline
0008 0008 Hb: Abnormally high value
Measurement number, port number and
abnormal result message
Print date and time
Type of measurement
Measurement mode: Var. (Variant) or Fast *1
Barcode errors
10-06-2010 10:00
Port No. HbA1c HbF
Meas No. Var.
0001 0001 30 4.5 0.5
0025 0025 41 5.6 0.6
0050
0050 36 5.1 0.6
Measurement number, port number and measurement results
(HbA1 C mmol/mol and %, HbF %)
Print date and time
Type of measurement
Measurement mode: Var. (Variant) or Fast *1
2.9 Displayed and Printed Reports