Array electronic SH-300 User Manual

SH-300 User’s Manual Software Part
Page 43 of 103
Example: Substitute the text “ENTER” for “LOGIN”, “QUIT” for “LOGOUT” and “RETURN” for
“EXIT”. Click “OK”, the following diagram will be displayed.
Click the “Input password” submenu, then the password input interface will be displayed as in
the following diagram.
If the text and the position of the information in the screen need to be changed, cross “user menu
setting” check box and doubt click “Input Password”, the following prompting frame will be
displayed as the following:
In this property frame, user can modify the X coordinate position of the menu information and the
Y coordinate position is fixed (at the top left corner, it is the original coordinate position (0, 0) of X
and Y) and the contents of the text information of the text frame (supporting multi language
system). If “Default” is selected, which means the default interface will be displayed when
communication. The displayed text is “Input password” and the coordinate position is X40 and Y8.
And the position of the password input is also fixed as in the following diagram:

Array electronic SH-300 Specifications

General

Brand	Array electronic
Model	SH-300
Category	Controller
Language	English