1.5 Reference directives
The machine supplied by ARS S.r.l. does not fall under one of the machine categories listed in Annex IV of the Directive; therefore,
for the purpose of certifying compliance of the machine with the provisions of this Directive, ARS S.r.l. applies the conformity
assessment procedure with internal control on the manufacture of machinery, as set forth in Annex VIII.
To certify compliance of the machine with the provisions of the Directive, before placing it on the market ARS S.r.l. carried out the
risk assessment in order to ascertain compliance with the essential health and safety requirements of the Directive as well as the
tests and inspections required by the applicable reference standards.
The technical construction file was prepared in compliance with the provisions of Annex VII of Directive 2006/42/EC and is available
for inspection by the supervisory bodies upon a reasoned request, as required by the legal provisions in force.
ARS S.r.l. therefore places the machine on the market together with:
To Next Page
Loading...