ARS Flexibowl 200 - General Cleaning

82 CHAPTER 7 - Maintenance
FlexiBowl® - Models 200 - 350 - 500 - 650 - 800
7.2.4.1 General cleaning
The machine must be kept in a good condition of cleanliness.
Proceed as described below to give the machine a general clean:
Step
Action
1
Disconnect the power and air supply of the machine.
2
Manually remove any product residues.
3
Remove the dirt with non-flammable and non-toxic commercial cleaning solvents.
4
If necessary, use a vacuum cleaner to remove any residues from the Rotary Disc.
5
After cleaning, restore all machine connections.
IMPORTANT!
The machine must be given a general cleaning whenever the type of component to be processed is changed, in
order to remove any residues from previous processes.