4 Description of the Machine
4.1 Intended use (correct)
Flexibowl® is available in five models: 200, 350, 500, 650 and 800.
The machine in question is designed for industrial use for:
IMPORTANT!
For more information on the type of components permitted, see the “Technical specifications” section in this
manual.
The machine is designed to:
• meet the specific requirements indicated in the sales contract;
• be used according to the instructions and limits of use given in this manual.
The machine is designed and built to safely work if:
• it is used within the limits stated in the contract and in this manual;
• the procedures in the instruction manual are followed;
• routine maintenance is carried out within the times and in the ways indicated;
• unscheduled maintenance is promptly carried out if required;
• the safety devices are not removed and/or bypassed.
4.2 Reasonably foreseeable misuse
Reasonably foreseeable misuse is described below:
• processing liquids and fine granules;
• changing any safety-related work parameters;
• transporting people;
• using the machine as a support point;
• using the machine to obtain production values above the prescribed limits;
• changing / tampering with the machine’s electrical and compressed air connections or any of its other components;
• using the machine with a product that is not listed in the “Intended (correct) use” section;
• using the machine in a way that is not specified in the “Intended (correct) use” section.
Any other machine use that is not specified must be authorised in writing beforehand by the Manufacturer. In the absence of
this written authorisation, the use is considered “misuse”; therefore, the Manufacturer disclaims any liability for damage caused
to property or people and deems every type of machine warranty null and void.
IMPORTANT!
Misuse of the machine excludes any liability of the Manufacturer.
To Next Page
Loading...