4.8 General description
The machine described in this manual is a rotary feeding system able to feed a wide range of loose parts in combination with any
industrial robot and artificial vision system. The parts can be different shapes and materials.
Flexibowl® is available in four models: 200, 350, 500, 650 and 800. Each model is built mainly of stainless steel with anodised
aluminium parts.
4.8.1 Processing cycle
A simplified description of the processing cycle is described below. The cycle is divided into the following phases:
The machine cyclically performs rotations (set by the operator) to shake the pieces, in order to constantly ensure
that they are in the pick-up position.
To Next Page
Loading...