ARS Flexibowl 200 - Pressure Adjustment; Switching off

70 CHAPTER 6 - Controls and use
FlexiBowl® - Models 200 - 350 - 500 - 650 - 800
6.3.4 Pressure adjustment
To adjust the pressure:
Step
Action
1
Pull the knob on the power supply body and turn it.
Note: turning it counterclockwise will lower the pressure, turning it clockwise will increase it.
2
When the pressure has been adjusted as required, push the knob towards the power supply and the setting will
automatically be locked in.
Note: This prevents accidental changes to the pressure settings.
3
The set pressure is displayed on the control panel’s screen
6.3.5 Switching off
Proceed as described to switch the machine off:
Step
Action
1
Check that the machine has finished the work process.
2
Disconnect the power switch.