8.2 Disposal
Machine scrapping operations must be assigned to qualified personnel, each for their own area of expertise.
When the machine will be disposed of, make sure it is made safe.
CAUTION!
Disconnect the power and air supply of the machine.
CAUTION!
For disassembly of trade parts or sub-supply materials that are part of the machine supplied by ARS S.r.l. please see
the relative supplier’s manual.
Pursuant to the “WEEE” Directive 2012/19/EU, if the component/equipment purchased is marked with the following crossed-out
wheelie bin, it means that at the end of its service life the product must be collected separately to other waste.
CAUTION!
It is mandatory to comply with the laws in force regarding disposal in the country of machine installation.
To Next Page
Loading...